42lb fun

[Area47]

i wasn't going to post this, but someone did it for me. damn me for not keeping the bucket private.

http://i107.photobucket.com/albums/m284/Area47/dyno273.jpg

my dyno on 42's.

[rlinbatonrouge]

Nice numbers on 42's. What size pulley and what IDC?

[Area47]

Nice numbers on 42's. What size pulley and what IDC?

2.8
92% i think. have to look at the log

[rlinbatonrouge]

2.8
92% i think. have to look at the log

Wow, I'd like to see your tune if possible.

[Area47]

Wow, I'd like to see your tune if possible.

ohhhhhhhhhhhhhhhhhhhhhh. what ya gonna do for me
:D

id actually have to find the map. i have this habit of hiding the retarded maps from myself.

[Doc]

only thing that jumps out is the afr....I thought I was ballsy doing 12.3
you need to find that map ;) please

[Area47]

only thing that jumps out is the afr....I thought I was ballsy doing 12.3
you need to find that map ;) please

doc, that was 12.3 afr.
:D

that afr idea from you actually!

[Doc]

snap, I thought it was at 14.76 and 14.77....:D

[Doc]

you made more hp but less torque and I used 60's....:lol:

[bc3tech]

snap, I thought it was at 14.76 and 14.77....:D
looks like that's cuz they just plain simple didn't have the sniffer in :)

[Doc]

Duh, I know that now. I always run with the sniffer even though I have my own w/b. I like logging it in the scanner as well. Makes for an interesting comparison.

[Area47]

doc, yes yes i know. pulley size difference does that. my torque should be up some more next week. there is a trade off, smaller pulley, less timing down low. bigger pulley more timing down low. i need to go back and tweek the map some more. audible knock is not a good thing

[bc3tech]

Duh, I know that now. I always run with the sniffer even though I have my own w/b. I like logging it in the scanner as well. Makes for an interesting comparison.
i wish i had any way of logging my AFR :(

[Paulumbo]

i wish i had any way of logging my AFR :(

Do a search on egay for an LC-1 I saw one last night for 179.00 shipped.

[bc3tech]

Do a search on egay for an LC-1 I saw one last night for 179.00 shipped.
i've got one - just nothing to log with. in order to log w/ the LC stuff you've got to have their LM module to go directly to a laptop, or something like HPT (i believe) - which is pointless for me to buy since HPT doesn't support the 2.2 anyway :cursin:

[rlinbatonrouge]

i've got one - just nothing to log with. in order to log w/ the LC stuff you've got to have their LM module to go directly to a laptop, or something like HPT (i believe) - which is pointless for me to buy since HPT doesn't support the 2.2 anyway :cursin:

They don't? I didn't know that....

[bc3tech]

They don't? I didn't know that....
dude if you're serious i should slap the piss outta you. :slap:

[rlinbatonrouge]

I just like messing with you.

[TheWastedYears]

i wish i had any way of logging my AFR :(
If you did, you might still be on the original engine. :bananahump:

[bc3tech]

If you did, you might still be on the original engine. :bananahump:
:nofu: good one. not true, but good one

[Doc]

Log works, the software that comes with the LC-1, can log afr.

[Paulumbo]

Log works, the software that comes with the LC-1, can log afr.

That's what I thought

[bc3tech]

Log works, the software that comes with the LC-1, can log afr.
but can't display to my xd16 at the same time... so i'd have to switch up the whole setup every time i want to log - annoying. but hey i may do that in the future when i've invested in a laptop strictly for the car

[Area47]

Log works, the software that comes with the LC-1, can log afr.

i never could get it to work right. so i just gave up. i know my car well enough i know where the afr should be. since it is getting colder out now, the afr is acting like a meth head on a cleaning spree.
:freak:

[Doc]

I have the serial to usb thingy and it works fine. I just connect it in the out line for the xd-16 and it reads the same as the gauge does.

Speaking of AFR's, I have yet to figure out why my afr jumps from ~11.8 to ~10.2 only in second gear. I don't get any knock and the timing is relatively the same. The afr is the only big difference. I'm stumped...especially since it only happens in second.

[bc3tech]

I have the serial to usb thingy and it works fine. I just connect it in the out line for the xd-16 and it reads the same as the gauge does...i tried this and never worked for me :(

[Area47]

I have the serial to usb thingy and it works fine. I just connect it in the out line for the xd-16 and it reads the same as the gauge does.

Speaking of AFR's, I have yet to figure out why my afr jumps from ~11.8 to ~10.2 only in second gear. I don't get any knock and the timing is relatively the same. The afr is the only big difference. I'm stumped...especially since it only happens in second.

my afr's in second do weird stuff too.

maybe the load difference? or the simple fact i don't have traction in second? {it rolls smoke off the tires now. doh!}

mine stay around, usually what i command it to do.

what is your pe delay set at?

[Paulumbo]

I'm thinking pe as well. IIRC doesn't the bypass valve fully shit when you do a 1-2 shift and does it do it just under full throttle or during part throttle as well?

[Doc]

MAP 55 kPa
MAP hyst 5 kPa
Delay RPM 1900
Enable RPM 0
RPM hyst 0

PE Fuel multipler
Labels 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5250 5500 5750 6000 6250 6500 6750 7000 7250 7500 7750 8000
EQ Ratio 1.13672 1.13672 1.13672 1.13672 1.13672 1.13672 1.13672 1.17090 1.20996 1.27344 1.40918 1.44531 1.40625 1.39063 1.36035 1.34277 1.34180 1.17969 1.11719 1.09375 1.09570 1.08398 1.05762 1.04590 1.01953 0.99316 0.99512 0.99414 1.01270 1.13867 1.13770 1.13965 1.13965

Enrichment rate: 1.000

just under WOT....

[Area47]

MAP 55 kPa
MAP hyst 5 kPa
Delay RPM 1900
Enable RPM 0
RPM hyst 0

PE Fuel multipler
Labels 0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5250 5500 5750 6000 6250 6500 6750 7000 7250 7500 7750 8000
EQ Ratio 1.13672 1.13672 1.13672 1.13672 1.13672 1.13672 1.13672 1.17090 1.20996 1.27344 1.40918 1.44531 1.40625 1.39063 1.36035 1.34277 1.34180 1.17969 1.11719 1.09375 1.09570 1.08398 1.05762 1.04590 1.01953 0.99316 0.99512 0.99414 1.01270 1.13867 1.13770 1.13965 1.13965

Enrichment rate: 1.000

just under WOT....

im running 1.258 till about 5500, then it gradually increases by .002 up to 8k. keeping me at 12.3 till 5k, then it goes down to 12.0 from there. something seems wacky with those numbers d00d. maf scaling in line?

[Doc]

I need to redo the maf...although this keeps me at 12.3 :D

[Area47]

same with mine. i just gave up on trying to fight it. you fart and the weather changes here. so i just set it close enough to keep me happy

[Doc]

I think mine will be better once I get back to the East Coast.

[Akai oni]

Any chance i could get that tune from ya? :D

[bc3tech]

Any chance i could get that tune from ya? :D
i'm pretty sure they're in the repository (http://www.eatoninside.com/downloads.php?do=cat&id=4)... i know there are a lot in there anyway.