BWoody Solid Motor Mounts

[Cat Ion]

Ok, so I have had them on for a couple weeks now and I'm starting to like them quite a bit. At first the car's response scared the crap outta me. I thought I missed something and immediately turned it off. I checked everything and restarted the motor. After the idle settled, it had a good vibe running through the entire body. They helped me find all the loose things on my car. My mirror nearly fell off the front glass. I think it was already loose prior to that though. Now they are settling in quite well. Now it has a bit of a race car feel (as my brother so eloquently put it). Kudos go out to those guys. The only complaint I have is that when I torqued the engine (passenger) mount down to the body, the e-blue paint cracked and flaked off, exposing the bare metal at both nuts. I torqued them by Saturn specs. Otherwise, these are a great feel. Traction is entirely different. I don't get any wheel hop. Just lights the tire up nice and smooth. No torque damper installed and no traction bars installed.

:bigthumb:

[JayCizzo]

Nice. How hard of install was it? I don't do a lot of installs on my car cause I'm very lazy and not very handy.

[bc3tech]

Nice. How hard of install was it? I don't do a lot of installs on my car cause I'm very lazy and not very handy.
install is cake - you could follow my mount-filling how-to to do it. and i'm the same way, so if i can do it you definitely can :)

[skoshi130]

I torqued them by Saturn specs.

Where di dy ou happen to find you r torque specs, as I am, looking into this option also

[bc3tech]

:rofl: @ tq specs... :no:

[mantiskungfu]

yeah these things are great!!!! had mine for almost 6 maybe 7 months now and I don't know how I drove my car with out them.... some of the best money I spent on this car.

[all4glh]

I torque all bolts to factory specs

rear transaxle mount thru-bolt (single bolt) 66 ft/lb
rear transaxle mount to subframe (3 bolts) 44 ft/lb
rear transaxle mount bracket to transaxle (3 bolts) 41 ft/lb

front transaxle mount thru-bolt 41 ft/lb
front transaxle mount to transaxle (2 bolts) 41 ft/lb

Engine mount to mid-rail (2 nuts) 74 ft/lb
Engine mount to intermediate bracket (3 bolts) 37 ft/lb
BWoody engine mount through bolt 75 ft/lb

I don't mean to steal from other sites, but it was on RLF.

[Cat Ion]

I torque all bolts to factory specs

rear transaxle mount thru-bolt (single bolt) 66 ft/lb
rear transaxle mount to subframe (3 bolts) 44 ft/lb
rear transaxle mount bracket to transaxle (3 bolts) 41 ft/lb

front transaxle mount thru-bolt 41 ft/lb
front transaxle mount to transaxle (2 bolts) 41 ft/lb

Engine mount to mid-rail (2 nuts) 74 ft/lb
Engine mount to intermediate bracket (3 bolts) 37 ft/lb
BWoody engine mount through bolt 75 ft/lb

I don't mean to steal from other sites, but it was on RLF.

That's where I got them from. Thanks for posting them here.

[skoshi130]

Thanks

[Hyperion]

Shameless link to my how-to:
http://www.redlineforums.com/forums/howto-section/16346-how-install-b-woody-solid-mounts.html

[mrphoto103]

Nice. How hard of install was it? I don't do a lot of installs on my car cause I'm very lazy and not very handy.

It is WAY easy to do. I haven installed quite a few now.

Hell, even Mattman or hawaiian whore could do it :rollinglaugh::rofl:

:rofl: @ tq specs... :no:

Buwahahahahaha that is exactly what i thought :rollinglaugh::rofl:

[Cat Ion]

Don't burn a man for following instructions! Chicks dig it when a man can do that....

[bc3tech]

Don't burn a man for following instructions! Chicks dig it when a man can do that....
fuck that - chicks dig a man who doesn't need instructions. :p

[Mattman6]

f u photo, at least I dont paint everything on my car blue

[Cat Ion]

fuck that - chicks dig a man who doesn't need instructions. :p

Yah, but this guy's chick digs when I don't have to repair or replace something that broke cuz I didn't read the instructions. She's happier in the end-I'm happier in the end. You should know this mang!

[bc3tech]

Yah, but this guy's chick digs when I don't have to repair or replace something that broke cuz I didn't read the instructions. She's happier in the end-I'm happier in the end. You should know this mang!
oh you're talking about written instructions.....

... you def weren't picking up what i was putting down ;)

[mrphoto103]

f u photo, at least I dont paint everything on my car blue

lol not my fault you have no skillz

u paint everything black....point being?

[skoshi130]

fuck that - chicks dig a man who doesn't need instructions. :p

"Measure twice, cut once" This guys chick appreciate's I also don't have to spend the extra money replacing something that would have been avoided at first

[bc3tech]

"Measure twice, cut once" This guys chick appreciate's I also don't have to spend the extra money replacing something that would have been avoided at first
y'all are so not getting it.

[Cat Ion]

oh you're talking about written instructions.....

... you def weren't picking up what i was putting down ;)

DING!!!! The light just came on. See my profile! I'm a blonde...